Adjusting The Clock; Setting The Timer - Yamaha RDX-E700 Mode D'emploi

Masquer les pouces Voir aussi pour RDX-E700:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 55

ADJUSTING THE CLOCK

STANDBY/ON
PHONES
TIMER
DISPLAY
SOUND
TIMER
MULTI JOG
You can set the timer function so that the DVD receiver turns on at the specified time and begins to play the selected input
source automatically.
STANDBY/ON
PHONES
TIMER
DISPLAY
SOUND
TIMER
MULTI JOG
16
ADJUSTING THE CLOCK
INPUT
MULTI JOG
PUSH-ENTER
MODE
MULTI JOG
VOLUME

SETTING THE TIMER

INPUT
MULTI JOG
PUSH-ENTER
MODE
VOLUME
1
Press TIMER on the front panel to select
"TIME" and then press MULTI JOG.
2
Rotate MULTI JOG to adjust the hour and
then press MULTI JOG.
3
Rotate MULTI JOG to adjust the minute and
then press MULTI JOG.
4
Press MULTI JOG again to set the time.
Note
You cannot set timer unless you adjust the clock.
1
Press TIMER on the front panel to select
"TIMER" and then press MULTI JOG.
2
Rotate MULTI JOG clockwise to select
"TIMER ON" and then press MULTI JOG.
The current timer setting is displayed.
3
Set the time that timer play begins using the
MULTI JOG, and then press MULTI JOG.
4
Rotate MULTI JOG to select the input source
to be played and then press MULTI JOG.
5
Rotate MULTI JOG to set the duration (30 to
90 min) and then press MULTI JOG.
You can set the duration in 10 minutes steps.
■ To cancel the timer
Select "TIMER OFF" in step 2.

Publicité

Table des Matières
loading

Table des Matières