Shipping Braces - DUROMAX DUAL FUEL XP5000EHC Manuel D'utilisation

GENERATOR SETUP
Step 1 - Remove Shipping Braces
18
1.
Unpack
a. Remove the generator from the box.
b. Place the largest piece of packing foam on a flat surface.
c. Flip the generator upside down on the pad.
CAUTION: NEVER Attempt this if you have put fuel or oil
2.
Remove braces
a. Completely remove each of the 4 bolts holding the
orange metal brace in place.
b. Remove the brace.
c. Cut the nylon tie strap holding the wood brace in
place.
d. Grab the end of the second brace and pull it out.
e. This piece is no longer needed and can be discarded.
Note: Shipping braces can be thrown away.
They will not be needed again.
in the generator.