Grandstream Networks GSC3615 Guide D'installation Rapide page 4

Step 2:
Place the cable into the groove of camera mounting base, mount the
base at wall using provided screws as shown in below diagram. Leave
the connectors of cable dangling outside the cover.
Step 3:
Use the provided hex key to lose the fix screw, rotate and adjust the cam-
era to the appropriate angle and position.
Step 4:
Hold the body of camera and align to the notch as shown in the diagram,
then push the body of camera into the cover of camera already mounted
at the ceiling.
Wall
Wall
Wall
~3~
GSC3615 CONFIGURATION
Following are the requirements to configure the GSC3615:
• Internet Browser like Firefox, Chrome, Microsoft Internet Explorer or
Edge.
• DHCP server enabled on the network.
Follow the steps below to access the GSC3615 WEB configuration page:
1. Download and install GS_Search tool from the link below:
http://www.grandstream.com/products/tools/surveillance/GS_Search.zip
2. Run the Grandstream GS_Search tool.
3. Click on button to start device detection.
4. The detected devices will appear in the output field as below.
Double click on the detected device. The default browser (Chrome in
5.
this example) will open to display the camera's login web interface.
~4~