Blaupunkt BLP4400-004 Manuel D'utilisation page 16

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Operation
Noise Cancelling
1. Press the ANC Button ON, the Noise Cancelling Indicator is green.
2. After turn the noise cancelling on, you may hear a slight hissing noise, this is normal will cease
after a few seconds.
3. When using noise cancelling feature, if the battery is off, the green indicator is off, if you want
to continue using noise cancelling feature, you need charge the battery. If you use wired
connection you can continue use the headphones.
Wireless Operation
1. Press the Multifunction Button for one second, you will hear "BEEP" with the Blue Indicator Is
Blinking. and the Bluetooth is in pairing mode.
2. Enable the Bluetooth on your mobile phone or the device you want to connect and
scan/search for new device.
3. When BLP4400 is found, select and connect, you will hear voice remind "BEEP" and the Blue
indicator will flash every five seconds. The connection is completed.
Play Music:
1. Press the Multifunction Button. Once to play music, and press it again to pause.
2. Press the Volume Down/ Previous Song Button. Once to play previous song, long press to
reduce the volume.
3. Press the Volume Up/Next Song Button. Once to play next song, long press to increase
volume.
Call Functions:
Call Answer: Press the Multifunction Button once to answer, and press again to end. Last
number redial: in standby mode, press the Multifunction Button twice to redial. .
103mm
103mm

Publicité

Table des Matières
loading

Table des Matières