Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7-3. Emergency stop mode setting
The following settings are required when emergency stop input is received at the external input pin of the
system remote controller.
[Setting]
(1) Following system start-up communication, press the
more than two seconds in the group operation screen or collective operation screen to display the
following and enter the emergency stop mode.
CENTRALIZED
COLLECTIVE
GROUP
ON
OFF
COL./GROUP
(2) When the
and
following is displayed, the emergency stop input mode is cleared, and the external timer mode is
selected.
CENTRALIZED
COLLECTIVE
ON
OFF
GROUP
NOTE: See the installation manual for the system remote controller for details of connecting the emer-
gency stop input cable.
8. Specifications
Specifications for this equipment
Item
Power supply
Electricity consumption
Environmental conditions for
usage
Weight
External dimensions
(H × W × D)
ON/OFF
PROHIBIT
CHECK
ON/OFF
MODE
AUTO
FILTER
TEMP.
BY-PASS
MODE LOCK
HEAT EX.
SKIP
FILTER
˚C
ON/OFF
switches are again pressed simultaneously for more than two seconds, the
ON/OFF
PROHIBIT
CHECK
ON/OFF
MODE
AUTO
FILTER
TEMP.
BY-PASS
MODE LOCK
HEAT EX.
SKIP
FILTER
˚C
DC30 V (power supplied from the outdoor unit or a power unit for
transmission lines (model: PAC-SC34KUA))
1 W
Temperature 0 to 40 °C, humidity 30 to 90 % RH
(with no condensation)
0.2 kg
120 × 130 × 18 (mm)
COL./GROUP
ON/OFF
and
In addition to [
CENTRALIZED
for two seconds in the group number display. Emergency
stop input is then possible.
In addition to [
CENTRALIZED
for two seconds in the group number display. The emer-
gency stop input mode is then cleared and the external pro-
gram timer may be connected.
Details
switches simultaneously for
] and
, [
] blinks
OFF
] and
, [
] blinks
OFF
23
Publicité
Chapitres
Table des Matières
