Fully Connected, Your Block Unit Can; Power; Power/Status Led - Traynor Block 10 Mode D'emploi

LINK: Use a stereo cable to link two BLOCK 12 units to
create a left and right stereo system. The Link connection
is designed to work with another BLOCK 12 only.
LINK PAN: Use the LINK PAN control to adjust signals being
sent to LINKED BLOCK 12s.
BALANCE: The LINK PAN control also functions as a balance
control for the Headphones.
Traynor Block 10 & Block 12
Today, keyboard players, acoustic guitarists, and other musicians need the ability to travel light. More importantly
they require amplification that maintains the highest standards of fidelity, versatility and reliability. The Traynor Block
Series answers those requirements and more.
The Block series is a linear mixing and amplification system built into a versatile combo-style enclosure.
What this means to the pro user is that you can take your Block 10 or 12 anywhere and do a number of things
a PA system would permit. While the Block 10 or 12 are not meant to replace a full PA-system, they can be
used as one. With the Block 10 or 12 used as a micro PA, the system fits in a subcompact car with room left
for a keyboard, a mic, a stand, a guitar and more.
Traynor's legendary reliability is a good base on which to build anything. The Block series offers four inputs; one
which accepts a mono or stereo keyboard output, one which accepts a dynamic microphone or acoustic-electric
guitar, one which accepts any line-level signal, perhaps from a PA mixer, and another which accepts a CD player or
other stereo program source – even a DSP outboard guitar preamp like a *Pod®.

Fully connected, your Block unit can

• Quality component selection including the use of high-grade glass epoxy circuit boards and low noise components.
• Four input channels utilizing an microphone compatible XLR, ¼-inch TRS phone jacks and1/8-inch (3.5 mm) jacks.
• 2-band EQ on both Channel 1 and Channel 2 .
• 2-way speaker system features a 200-watt 10-inch low frequency driver (12-inch on Block 12) and a 2.5-
inch 20-watt high frequency driver.
• Blend up to four audio sources into a single mono mix-down.
• Professional Line Out using XLR jack with switchable pre/post-EQ and ground lift options. Feed your mixed,
mono signal to a house PA or recording desk – fully balanced.
• Help you record, or practice silently with headphones (in stereo, if the input is stereo).
• Supply a stereo Link signal to another Block unit if you want stereo sound onstage.
• Be set up anywhere. The Block 10 and 12 have speaker stands built-in while also being able to fit neatly under
a keyboard stand or can face you onstage as a monitor.
• Provide clear, accurate performance for years to come.
*Covered by our famous 2 year unlimited* "Even if you break it" warranty

Power

1. Power/Status LED

The power LED displays the status and condition of the amplifier. When powering up the Traynor Block amplifier,
the LED will illuminate red for a few moments and then turn blue when the amp is ready to go. If a fault is de-
tected, the LED will constantly illuminate red.
BLOCK
12
Left BLOCK 12 Amp
IN MEMORY OF
ADIL WILSON
1
TYPE: YS1115
DESIGNED & MANUFACTURED BY
Right BLOCK 12 Amp
YORKVILLE SOUND • TORONTO, CANADA
A-Z1615BR/1v0
Power
On Off