Battery Status - Asus ROG SPATHA X P707 Guide De Démarrage Rapide

Connecting your gaming mouse
Setting up your gaming mouse as a wired mouse
Connect the bundled USB Type-C® to Type-A cable to your gaming mouse and a USB port on your computer.
Setting up your gaming mouse as an RF wireless mouse
NOTE: Download the driver from https://www.asus.com and install
it on your computer.
1. Connect the bundled USB Type-C® to Type-A cable to your wireless
receiver/charging dock and a USB port on your computer.
NOTE: Your gaming mouse comes paired by default. Please follow
steps 2 - 5 only if you need to pair your gaming mouse again.
2. Press the Pairing button for 3 seconds on the rear of your wireless
receiver/charging dock, the Dock LED indicator should begin blinking
green.
3. Slide the Power Switch to turn on your ROG SPATHA X gaming mouse.
4. Press the Pairing button for 3 seconds on your ROG SPATHA X gaming
mouse, the LEDs should begin blinking green.
5. The Dock LED indicator and gaming mouse LEDs will return to their
original lighting effects when your ROG SPATHA X gaming mouse has
successfully paired.
NOTE: Click on the left button to wake your ROG SPATHA X gaming
mouse from sleep mode.
Specifications*
Resolution
100 DPI to 19000 DPI
* You may customize the DPI settings for DPI 1-4 through Armoury Crate or the DPI On-The-Scroll tuning function.
Gaming mouse profiles
Profile
Profile 1
+
Profile 2
+
Profile 3
+
Profile 4
+
Profile 5
+

Battery Status

The LEDs on your gaming mouse will turn red (breathing) when the battery power is below 20% in RF 2.4G
mode. You may charge your gaming mouse by using the bundled USB cable or wireless receiver/charging dock.
6
DPI 1 DPI 2
400 DPI 800 DPI
Default lighting effect
Rainbow (Default)
Color cycle
Breathing (blue)
Reactive (Green)
Comet
DPI 3 (Default) DPI 4
1600 DPI 3200 DPI
Quick Start Guide