Cleaning And Maintenance - Qilive Party Soundbox Q.1991 Manuel D'utilisation

Connect one end of the audio cable to the speaker and the other end to a smartphone or
another audio device.
During playback:
1. Turn the volume adjustment button to adjust the volume to the desired level, or set the
volume using the source device (in Bluetooth mode only).
2. Press the Play/Pause button once to pause the music; Press it again to restart the music.
3. Briefly press on the Previous button to go back to the previous track, press the Next button
to skip to the next track.
4.4 Slot for USB/micro SD (TF) card
Turn on the device and insert a USB or micro SD (TF) card into the USB/micro SD (TF) card
slot. The music will then play automatically.
During playback:
1. Turn the volume adjustment button to set the volume to the desired level.
2. Press the Play/Pause button once to pause the music; Press it again to restart the music.
3. Briefly press on the Previous button to go back to the previous track, press the Next button
to skip to the next track.
4.5 Colour-changing lights on the speaker
RGB illumination on the front. Press and hold to switch between modes.
1. Yellow flame effect.
2. RGB on the front
3. Blue flame effect
4. Rainbow effect (switches between all colours)
5. EQ mode, synchronises with the music
6. RGB on the front, top and bottom
7. Illumination off
4.6 Karaoke
Turn the device on, insert the microphone jack (not provided) into the MIC socket on the
device. Turn the volume adjustment button to set the volume to the desired level.

5. CLEANING AND MAINTENANCE

Always unplug the device before cleaning it.
Clean the device with a soft cloth.
Never use aggressive cleaning products. Avoid acidic substances coming into contact with
the device.
Store the device in an area free from dust and frost.
7
EN