Technical Specifications - Qilive Party Soundbox Q.1991 Manuel D'utilisation

2. TECHNICAL SPECIFICATIONS

EN
Rated voltage
Battery power
Power output
Bluetooth
Transmission power
Output power (W)
Operating temperature
Dimensions
Weight
3. DESCRIPTION
1. ON/OFF power button and volume
adjustment knob
2. Microphone input jack
3. EQ: Press briefly to switch between
the 6 modes: NORMAL, POP, ROCK,
JAZZ, CLASSIC, BASS
4. LED indicator light
5. 9V 2A mains adapter (please only
use the adapter supplied with the
speaker)
6. Previous track
Note: The USB port can only be used to play music from a USB format. It is not designed to
charge other devices. Using it as a charging point may cause damage.
4. USE
4.1 Charging
Connect the charging cable into the speaker and then plug in the 9V 2A mains power adapter.
You'll hear a beep a few minutes before the battery runs out. When you hear the first beep,
plug your speaker in to recharge it.
4.2 Bluetooth connection
Turn the power/volume button to the ON position.
Search for "PARTYSOUNDBOX200" on your smartphone or another Bluetooth device and
select it once detected. The speaker will emit a sound signal once paired.
4.3 Aux-in connection
Connect the audio via a smartphone / iPad / computer / Notebook / DVD player / etc.
Input : DC 9 V, 2 A
Rechargeable battery 7.4V/1800 mAh
5V / 500 mAh (2,5 W)
Bluetooth version: 5.0
Frequency range: 2.402 GHz-2.480 GHz
Range: Up to 10 m
-4,58 dBm
2 x 100 W
0 °C to +40 °C
215x210x570 mm
3,2 Kgs
7. Aux-in input
8. Play/Pause (briefly press to play and
pause the music)
9. Micro SD card slot
10. Next track
11. USB port
12. Briefly press this button to switch
mode. Press and hold this button to
change and turn off the LED lighting
modes.
6