Velleman RIKOMAGIC MK802IIIS Mode D'emploi page 9

You can connect the device to a wired network (Ethernet) using a
UBS LAN adapter. To enable ethernet:
• Click Use Ethernet.
Data usage
Settings > Data usage
Shows the data usage of every app.
Portable hotspot
Settings > More > Portable hotspot
If your device is connected to an ethernet connection, you can use
your device as a wireless access point.
• Click Set up Wi-Fi hotspot, enter the appropriate settings and click
Save to confirm.
PPPoE
Settings > More > PPPoE
If you need PPPoE (Point-to-Point Protocol over Ethernet), you can
enter these settings as follows:
• Click PPPoE account to enter your account details.
USB
Settings > USB
You can connect the device to your computer to copy files between
both.
Use the included micro USB to USB cable to connect the device to
your computer.
Make sure the device is connect to your HDMI display.
• Click Connect to PC.
You can now copy files from your computer to the device or vice-
versa.
Sound
Settings > Sound
The available settings are: volume, vibration and sound devices (if
connected).
Display
Settings > Display
The Display option allows setting the font size.
V. 02 – 12/09/2013
PCTV2
9 ©Velleman nv