Velleman RIKOMAGIC MK802IIIS Mode D'emploi page 24

15. Click the button Upgrade.
The upgrade takes about 3 minutes. Do not disconnect the
device during upgrade.
When the installation is successful, the following window
appears:
16. Click Exit.
If necessary, safely remove the device before unplugging it (see
section Safely remove the device from your computer below).
Note
When running the device for the first time after a firmware update,
the device may run low or take more time to start.
15.6 Safely remove the device from your computer
To safely remove the device:
1.
Click the icon Safely Remove Hardware
area at the right of the taskbar and click the device that you
want to remove.
V. 02 – 12/09/2013
PCTV2
24
in the notification
©Velleman nv