Velleman WIFIR1 Notice D'emploi page 8

a9. Select your wireless network and click Next to continue.
a10. Enter the password for your network in the Pre-Shared Key
box.
Caution: Leave all other settings as they are!
a11. Click Apply and Reboot.
a12. In the popup window, click OK to confirm. The repeater will
restart.
a13. Wait until the home screen appears again (see image step a5).
Your repeater is now ready for use.
b. Configuring Repeater Mode Wirelessly
V. 01 – 14/02/2012
WIFIR1
b1. Plug the WIFIR1 into a wall
socket.
b2. On your pc, click the
wireless network icon
or
bottom right of your screen.
You will see the signal from
the WiFi repeater.
b3. Select the WiFi Repeater
and click the Connect
button.
b4. Follow steps a3 to a13 to
configure the repeater.
8
located at the
©Velleman nv