Horizon Fitness CT9.1 Manuel Du Propriétaire page 12

ASSEMBLY STEp 3
HARdWARE bAG 3 CONTENTS :
BOLT (A)
20 mm
Qty: 4
ARC WASHERS (C)
SPRING WASHERS (B)
BOLTS (A)
CONSOLE MAST
12
SPRING WASHER (B) ARC WASHER (C)
8.2 mm 8.2 mm
Qty: 4 Qty: 4
CONSOLE MAST BOOT
CONSOLE CABLES
Open HARdWARE bAG 3.
A
Slide CONSOlE through the CONSOlE
B
MAST bOOTS.
NOTE: Make sure the arrows on the mast rings
are pointing upward towards the console when
sliding into place.
Connect CONSOlE CAblES.
C
NOTE: Be careful not to pinch any wires
CONSOLE
while assembling the right console mast.
Connect CONSOlE to RIGHT CONSOlE
D
MAST using 2 bOlTS (A), 2 SpRING
WASHERS (b) and 2 ARC WASHERS (C).
Repeat on other side.
E