Horizon Fitness CT9.1 Manuel Du Propriétaire page 11

ASSEMBLY STEp 2
HARdWARE bAG 2 CONTENTS :
BOLT (E)
15 mm
Qty: 4
BOLTS (E)
SPRING WASHERS (B)
CONSOLE (UPSIDE DOWN)
CONSOLE MAST CAP
SPRING WASHER (B)
8.2 mm
Qty: 4
Open HARdWARE bAG 2.
A
With the CONSOlE upside down, attach the
B
CONSOlE MAST CApS to the CONSOlE
using 4 bOlTS (E) and 4 SpRING
WASHERS (b).
NOTE: The console mast caps are marked with an
L if they are to be used on the left-hand side of the
treadmill or an R if they are to be used on the right-
hand side of the treadmill. If the console mast caps
are assembled on the incorrect side of the treadmill,
the unit will not assemble correctly.
11