Operation And Functions - Amica KGC 15440 E Notice D'utilisation

Control panel (Fig. 10).
1. Bulb cover
2. Temperature adjustment knob
Temperature adjustment
Turning the knob to a different setting changes the temperature in the fridge-freezer.
Available knob settings:
• appliance switched off
• maximum temperature
• optimal temperature
• minimum temperature
Do not put food into the fridge freezer befo-
re it has reached its operating temperature,
which takes minimum 4 hours.
Temperature inside the fridge / freezer chamber
Do not change the temperature settings due to the change in the season of the year. The ambient tem-
perature increase will be detected by the sensor and the compressor will be switched on automatically
for a longer period of time in order to maintain the temperature set inside the chambers.
Minor changes in temperature
The slight changes in temperature are perfectly normal and may occur, for instance during the storage
of great quantities of fresh products in the fridge, or when the door is open for a longer period of time.
This will not affect the condition of the stored foodstuff, and the temperature will quickly return to its set
value.
Replace the light bulb*
l Set the knob to „OFF", then unplug the appliance.
l Remove the bulb cover (Fig. 18).
l Replace the bulb with one having identical parameters as the bulb factory pre-installed in the ap-
pliance (E14 thread, 220-240V, max 10W, maximum dimensions: diameter 26 mm, length 55 mm).
l Replace the bulb cover.
Bulbs of a higher or lower power should not be used, only use bulbs of the specification given
above.
The light bulb must not be used for room illumination.
* Applicable to appliances factory designed for incandescent lighting, and selected appliances equip-
ped with LED lighting in the form of a E14 thread light bulb.

OPERATION AND FUNCTIONS

- OFF/0 setting
- 1 setting
- 2-6 setting
- 7 setting
19