NORTHFLO PSNF50 Manuel D'installation Et D'utilisation page 11

4. Automatic on/off
This function can make the machine work or stop automatically in your required
time.
A. Time on
a. Press
b. When the indicator light is on and the time is flashing , press
hour. Use
c. Before the flashing stops, press
d. After adjusting, press "TIMER ON" and water temperature will be seen. 30
seconds later, the controller display will be back to the normal mode.
B. Time off
a. Press
b. When the indicator light is on and the time is flashing , press
hour. Use
c. Before the flashing stop, press
d. After adjusting, press
the controller display will be back to the normal mode.
C. Cancelling the automatic mode
a. Press
b. When the number is flashing, press
LED shows water temperature, the timer on and off is canceled.
c. 30 seconds later, the controller display will be back to the permanent display.
to set timer on.
and to adjust.
to set timer off.
and to adjust.
and water temperature will be seen. 30 seconds later,
or to cancel timer on and off.
to set minute Use
to set minute Use
. When timer indicator light is off and
11
again to set
and to adjust.
again to set
and to adjust.