NORTHFLO PSNF50 Manuel D'installation Et D'utilisation page 10

1. Operation Display
a. The display shows Time when the machine is off.
b. The display shows Temperature of the swimming pool water when the machine
is on.
2. Required pool water temperature
It can be adjusted both when the machine is on or off.
a. Press UP-ALLOW key
pool water temperature.
b. The numbers in the LED screen will flash during your operation.
c. After five seconds, it will stop flashing and be saved, the LED screen will return
to the permanent display.
d. When you want to check the temperature, press key
setting.
3. Time setting
It can be adjusted both when the machine is on or off.
a. Press
screen flashes.
b. Press
c. Before it stops flashing, press
minutes.
d. After setting, press
later, it will stop flashing and the LED screen will return to the permanent
display.
or DOWN-ALLOW key
key to set time according to your local time. Time on the LED
again then press key
and the water temperature will appears. 30 seconds
or to set hour.
and then press key
10
to set to your required
or to see the current
or to set