Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. BIU405 BUILT-IN INSTRUCTIONS
N080-0215
N715-0083
N570-0026
N570-0026
N570-0026
N080-0215
W445-0031
N010-0281
23 e c-c
N080-0155
N080-0155
This grill is designed for MASONRY, NON-COMBUSTIBLE enclosures only, and must be installed and serviced by a qualified installer
to local codes. Access must be provided in the enclosure for drip tray removal and cleaning.
1. Attach the side mounting brackets and the rear trim to the unit using #14 x 1/2" screws (n570-0026). The wings on the rear trim
should be under the side mounting brackets.
2. Attach the supplied brackets flush with the front of the opening as per the dimensions in the above drawing (fasteners not in-
cluded).
3. Lower the unit in place ensuring the brackets installed in the previous step engage between the control panel and the base
bracket. Connect the flex line to the fitting at the end of the manifold.
4. The entire installation must be leak tested before operating the unit.
Publicité
Table des Matières
