Shipment And Repositioning; Transportation And Changing Positioning; Before Calling After-Sales Service - Laurus LKS82F Guide D'utilisation

6 SHIPMENT AND
REPOSITIONING
6.1 Transportation and Changing
Positioning
• The original packaging and foam may be
kept for re-transportation (optional).
• Fasten your appliance with thick
packaging, bands or strong cords and
follow the instructions for transportation
on the packaging.
• Remove all movable parts (shelves,
accessories, vegetable bins, and so on)
or fix them into the appliance against
shocks using bands when re-positioning
or transporting.
Always carry your appliance in the
upright position.
7 BEFORE CALLING AFTER-
SALES SERVICE
Your fridge is not operating
Check if:
• There is power
• The plug is correctly connected to the
socket
• The plug or mains fuse has blown
• The socket is faulty. Examine this by
plugging your fridge into a working
socket.
The appliance performs poorly
Check if:
• The appliance is overloaded
• The doors are closed properly
• There is any dust on the condenser
• There is enough space near the rear and
side walls.
Your fridge is operating noisily
Motor noise: Indicates the compressor
is operating normally. The compressor
may cause more noise for a short time
when it is first activated.
Bubbling noise and splash: Due to
the flow of the refrigerant in the tubes of
the system.
Air blowing noise: Indicates normal
operation of the system due to the
circulation of air.
There is a build-up of humidity inside
the cooler
Check if:
• All food is packed properly. Containers
must be dry before being placed in the
fridge.
• The fridge door is opened frequently.
Humidity of the room enters the fridge
when the doors are opened. Humidity
increases faster when the doors are
opened more frequently, especially if the
humidity of the room is high.
EN - 33