Initial Setup - Thera Lite Radiance Mode D'emploi

Initial Setup

When you first power up your device, a tone will sound and the LCD screen will display [ 12:00 1/1THU ] .
To Set Date and Time
1. Toggle between 12HR and 24HR clock format settings
by simply pressing the
2. Press the icon to begin setting the time.
3. Use the arrows to set the hour. The [ PM ]
symbol will appear when selecting an afternoon/
evening time. If selecting an AM time, there will be no
corresponding symbol.
4. When you are finished selecting the hour, press
You will now be prompted to set the minutes.
5. Use the arrows to select the minutes.
6. When you are finished selecting the minutes, press
You will now be prompted to set the year.
7. Use the arrows to select the year.
8. When you are finished selecting the year, press
You will now be prompted to set the month.
9. Use the arrows to select the month.
10. When you are finished selecting the month, press
You will now be prompted to set the date.
11. Use the arrows to select the date.
12. Press to return to normal mode.
PULL
arrow.
.
.
.
.
Back Light ON/OFF
Mode Selection
Set
Up
Down
Battery Cover
Pull the label before use
To Set the Alarm
1. Press .
2. Press .
3. Use the arrows to set the hour. The [ PM ] symbol will
appear when selecting an afternoon/evening time. If selecting an
AM time, there will be no corresponding symbol.
4. When you are finished selecting the hour, press
be prompted to set the minutes.
5. Use the arrows to select the minutes.
6. Press again. You will now be prompted to set the snooze timer.
7. Use the arrows to select the minutes. You can choose
anything between 0–60 minutes.
8. Press . You will now be prompted to select an alarm tone.
9. Use the arrows to select a tone.
10. Press to return to normal mode.
To Turn On the Alarm
1. Press .
2. The alarm icon will appear, which is [
3. Push the arrow once to turn the alarm on. A [
indicating the alarm is on.
4. Push the arrow again to enable the snooze alarm. A [
will appear indicating that the snooze feature is set.
5. Press to return to normal mode.
To Turn Off the Alarm
1. When alarm is set, it will sounds for one full minute and then
enter snooze mode (if you have enabled it).
2. Push any button to turn alarm off.
3. If snooze is enabled, alarm will sound again after the designated
amount of time you selected in the snooze setting. To turn this off,
press and then press the
goes away.
Thermometer Settings
When in normal mode, toggle between Celsius and Fahrenheit by
simply pressing the arrow.
. You will now
].
] will appear
] icon
arrow until the snooze icon [ ]