NewAge Products Home Cabinet Sinks Guide D'installation page 19

Preparing counter top
Using a set square, mark centre line onto the counter top bottom surface with respect to the sink
cabinet as shown. Refer to diagram (C) for Double Bowl Undermount Sink cut-out template.
Place the template on the centre line and trace the cut out line as shown. Refer to the template
provided with Sink and take to the countertop supplier to have it cut.
C
UNDERMOUNT CUTTING TEMPLATE - Double Bowl Sink
Positive Reveal
Centre Line
Cutout line
Back Edge
of Counter top
Front Edge
of Counter top
19
Cutout Measurements - TOP VIEW
Zero Reveal
Negative
Reveal
R 0.39", 10mm
R 0.39", 10mm
28.77", 731mm
(For Undermount Sinks)
Zero Reveal
1.5
Positive
mm
Reveal
1.5
mm
Negative Reveal
1.5 1.5
mm mm