Hardware Contents; Safety Information; Preparation - Elan 83564 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

HARDWARE CONTENTS

AA
BB
Wire
Short
Connector
Machine
Qty: 3
Screw
Qty: 2

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
IMPORTANT: NEVER attempt any work without shutting off the electricity.
Go to the main fuse box, or circuit breaker, in your home. Place the main power switch in the
"OFF" position and unscrew the fuse(s), or switch "OFF" the circuit breaker switch(es), that control
the power to the fixture or room that you are working on.
Place the wall switch in the "OFF" position. If the fixture to be replaced has a switch or pull chain,
place it in the "OFF" position.
Do not use bulbs with wattage greater than specified on this fixture.
WARNING: California Prop. 65: This lighting fixture contains chemicals known to the state of
California to cause cancer, birth defects, and/or other reproductive harm. Wash hands after use.
CAUTION
• Read and understand all instructions and illustrations completely before proceeding with assembly
and installation of this fixture.
• If you have any doubts about how to install this lighting fixture, or if the fixture fails to operate
completely, please contact a licensed electrical contractor.
• All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts
out, or use any parts that are worn out or broken. Failure to obey this instruction could invalidate
the ETL listing and/or C.S.A. certification of this fixture.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time: 30 minutes to 1 hour
Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers,
electrical tape, ladder, safety glasses.
CC
DD
Threaded
Knob
Qty: 2
Long
Machine
Screw
Qty: 2
EE
FF
Allen
Screw
Qty: 2
Diffuser
Screw
Qty: 4
Wrench
Qty: 1
3
GG

Publicité

Table des Matières
loading

Produits Connexes pour Elan 83564

Table des Matières