Optional Accessories - Uline H-6896 Manuel D'instructions

NOTE: The following products are optional accessories.
Top
Additional Shelf
ASSEMBLY INSTRUCTIONS
OPTIONAL TOP
1. Bolt top to door frame and side panels using six
shorter carriage bolts and six nuts, with nuts on the
inside of unit. (See Figure 7)
NOTE: If attaching top with add-on units, use
two L-brackets, two shorter carriage bolts and
two nuts to connect the starter unit side panel
to the add-on top panel. (See Figure 9)
OPTIONAL BACK
1. Bolt back to side panels using eight shorter carriage
bolts and eight nuts, with nuts on the inside of the unit.
(See Figure 8)
NOTE: If attaching back with add-on units, use
four L-brackets, four shorter carriage bolts and
four nuts to connect the starter unit side panel
to the add-on back panel. (See Figure 9)
PAGE 3 OF 12

OPTIONAL ACCESSORIES

Additional Shelf Rail
Back
Figure 9
(For Add-On Units Only)
Starter Unit
Back
# DESCRIPTION
1 Top
2 Back
3 Additional Shelf (Multiple Pieces)
4 Additional Shelf Rail
Short Hex Head Bolt (Not Shown)
Longer Carriage Bolt (Not Shown)
Shorter Carriage Bolt (Not Shown)
Nut (Not Shown)
L-Bracket (Not Shown)
Figure 7
Figure 8
Top
QTY.
1
1
1
2
6 or 8
4
19
23
6
Add-On
Unit
L-Brackets
1122 IH-6896