Uline H-4176 Instructions

H-4176
WALL-MOUNT FLAMMABLE
STORAGE CABINET
TOOLS NEEDED
5/16" (8 mm)
Socket Wrench
#12 - 2⁄" TEK Screw x 2
Self-Tapping Screw x 2
NOTE: To ensure safety in facilities, it's important to eliminate the chance of an electrostatic discharge
while handling flammable fluids.
CAUTION! If user will dispense Class 1 flammable liquids from a container held within safety cabinet, ground
the cabinet. As an industry best practice, it is recommended to ground the cabinet when dispensing Class 2
combustible liquids if the liquids are near, at, or above the liquid's flashpoint temperature. Be aware of these
external and internal grounding considerations.
1. For exterior cabinet grounding, locate the safety
cabinet's ground screw just below the green dot on
the right-hand side. (See Figure 1)
Figure 1
PAGE 1 OF 9
Electric Drill 1/8" Drill Bit
1/4" Drill Bit
Bolt x 3
GROUNDING INSTRUCTIONS
Ground
Screw
1-800-295-5510
uline.com
PARTS
Washer x 3 Nut x 3
2. Use a 5/16" (8 mm)
wrench or nut driver to
loosen screw.
(See Figure 2)
Attach the ground wire
and retighten screw.
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
Internal Tooth
Lockwasher x 3
Spacer x 2
Ground Screw
Connection
Figure 2
1221 IH-4176