Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation Steps
After setting board on brackets,
install nuts on square head bolts,
do not tighten.
Tighten all bracket bolts.
9
Position Board for best appearance,
keep Splash Guard tight to Wheel Well.
Tighten nuts on square head bolts.
10
Drill 1/8" holes thorough Wheel Well Lip
and Splash Guard, apply Silicone to holes
after drilling. install #8x1" Black screws.
11
Page 5 of 6
10693
Rev RE
Publicité
Table des Matières
