Hikerboy FOXTROT PLUS Manuel D'utilisation page 24

REMOVE & CHARGE THE BATTERY
• Unlock the platform of the scooter on each side by turning only one turn with
the key provided. (A-1) Lift up the tray, to release it.
• Disconnect the battery as shown in picture B.
• Move the charger to the side and close the port with the cover C.
• Remove the battery using the handle D.
• Open the top cover of the battery and connect the battery with charger E.
Note: Immediately charge the scooter before your first use. Make sure that the
mains voltage is compatible. (AC100V-240V).
• Once the charge is complete reposition the battery, reconnect the battery to the holder and close the tray, simply
by pressing the push buttons on each side.
Charging Instructions:
The charger indicator light is red when the battery is charging and turns green when charging is complete.
Be sure to switch off your scooter before loading. Always check for any abnormalities before charging the electric
scooter.
(Note: Place the battery in a dry and ventilated space when charging. Do not cover the charger during charging.
Make sure that there is no flammable or explosive material near the battery.)
24