Obtaining Technical Assistance; Technical Specifications - Dell PowerEdge T710 Guide De Mise En Route

Obtaining Technical Assistance

If you do not understand a procedure in this guide or if the system does
not perform as expected, see your Hardware Owner's Manual. Dell™ offers
comprehensive hardware training and certification. See www.dell.com/training
for more information. This service may not be offered in all locations.

Technical Specifications

Processor
Processor type
Expansion Bus
Bus type
Expansion slots
Memory
Architecture
Memory module sockets
Memory module capacities
Minimum RAM
Maximum RAM
8
Getting Started With Your System
® ®
Intel Xeon Processor 5500 series
PCI Express Generation 2
Slot 0: PCIe x8 Storage
Slot 1: PCIe x4
Slot 2: PCIe x16
Slot 3: PCIe x8
Slot 4: PCIe x8
Slot 5: PCIe x8
Slot 6: PCIe x8
NOTE:
A maximum of 110W is allocated to add-in
cards. All slots support up to 25W, but a maximum of
2x 25W cards and 4x 15W cards may be installed at
any time, regardless of the slots they are installed in.
800-Mhz, 1066-MHz, or 1333-MHz DDR3
registered or unbuffered Error Correcting Code
(ECC) DIMMs.
Eighteen 240-pin
1 GB, 2 GB, 4 GB, or 8 GB (16 GB when
available)
1 GB
144 GB