Error Code - EXIT Toys Deluxe spa Mode D'emploi

8.2. Error code

If the screen displays an error code "Ex", please refer to the table below.
E3, E4, E5, E6 error code
Cut of electricity for 5 minutes and reconnect.
If error code is still displayed on the control Box, please do the following instrutions:
1). Check that the water line is between the high and low limits.
2). Clean or replace the filter cartridge.
3). Unscrew and clean the 2 nozzles (Entry and exit of water) i nside the spa and
remove wastes if necessary (Neaf, hairs, fur, skin...)
4). Check that the propeller of the filter pump does not contain foreign matter.
Cut the spa again electrically for 5 minutes and re-connect it, if the error code is still
displayed on the control box please contact
the Service Center.
19
MSP-35101-V01