Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.2 RCD test
WARNING: The RCD plug must be tested before each use. Do not use if RCD test
fails
Grounding
You are recommended to use the services of a qualified electrician to ensure that the
spa is electrically grounded by using a copper conductor of at least 2.5 mm²
crosssection
5. Assembling
11
MSP-35101-V01
Warning : Do not leave spa unattended while filling with water. Make sure
the drain fitting is plugged securely and the cap is in place. Start filling the
spa with water. After about 1-inch of water is on the bottom, stop filling
and smooth wrinkles out of the bottom of the spa. Pull the outer wall out
from the top edge, all around the bottom of the spa, so that it fills evently.
Continue filling the spa until waterflevel.
Publicité
Table des Matières
