Oursson EK1742G Manuel D'instructions page 11

3. OURSSON AG does not recommend the use of this
product after the end of its lifetime without its preventive
maintenance by the authorized service center, since inthis
case, the product can be dangerous to the life, health or
property of the consumer.
Product Recycling and Disposal
This appliance has been identified in accordance with the
European directive 2002/96/EG on Waste Electrical and
Electronic Equipment – WEEE.
After the expiration of the lifetime, the product cannot be
disposed with another household waste. Instead, it shall be
deposited in the appropriate recycling collection point for
electrical and electronic equipment for proper treatment and
disposal in accordance with federal or local law. By dispos-
ing correctly this product, you will help to conserve natural
resources and preventing the product from damaging
the environment and human health. For more infor-
mation on the collection point and recycling of this
product, please contact your local municipal authori-
ties or the enterprise for household waste disposal.
Date of manufacture
Each product has a unique serial number in the form of
alphanumeric row and is duplicated with a barcode that
contains the following information: name of the product
group, date of manufacture, serial number of the product.
If you have questions or problems with OURSSON AG products - please contact us by e-mail:
support@oursson.com
This manual is under protection of international and EU copyright law. Any unauthorized use of the instructions, in-
cluding copying, printing and distribution, but not limited to, involves the application of the guilty person to civil liability
and criminal liability.
Contact information:
1. Manufacturer of goods - OURSSON AG (Orson AG), Rue du Grand-Chêne 5, 1003 Lausanne, Switzerland.
2. Certification information product available on the website www.oursson.com.
OURSSON AG
Made in China
EK 19 08011234567
1 2 3
Serial number is located on the rear of the product, on the
package and the warranty card.
The first two letters-correspondence to the product
group (electric kettle - EK).
The first two digits – year of manufacture.
The second two digits – month of manufacture.
The last two digits – serial number of product.
To avoid misunderstandings, we highly rec-
ommend you to read carefully the instruction
manual and the warranty obligations. Check
the correctness of the warranty card. War-
ranty card is valid only if the following are cor-
rectly and clearly stated: model, serial num-
ber, date of purchase, clear stamps, buyer's
signature. The serial number and the model
of the device must be the same as in the war-
ranty card. If these conditions are not fulfilled
or the data specified in the warranty card was
changed, the warranty card is invalid.
4
11