Installation Precautions - Triangle BOREA BRC01 Mode D'emploi Et Garantie

Table des Matières

Publicité

EN
UNPACKING
Open the box, and take out the speakers and accessories. If you notice any defects in one of the
elements as you unpack, please get in touch with your reseller.
Before disposing of the packaging, make sure there is nothing left inside. Each box contains :
Box content (BRC01)
Î 1 x Borea central speaker
Î 1 x protections grid
Î 4 x adhesive rubber plots
Î 1 x user manual
Contenu pack (BR02, BR03)
Î 2 x Borea speakers
Î 2 x protections grids
Î 8 x adhesive rubber plots
Î 1 x user manual

INSTALLATION PRECAUTIONS

Before the installation
Before making any connections, turn off the devices. Be sure to always set the active speaker switch
to OFF before removing or plugging connection cables. Do not plug in the power cord before all
connections are made.
Moving the device
Always remove the power cord and disconnect the cables between all components when moving
the device. This will prevent a short-circuit or the damage to the plugs or connection cables.
Before turning on the device
Check one last time if all the connections are correct.
Location to avoid
Install your speakers in a temperate place and avoid humid locations or direct sunlight.
Recycling
Protection of the environment: Your products contain valuable materials which can be
recovered or recycled. Take them to the appropriate collection points.
Contenu pack (à partir de BR05)
Î 2 x enceintes Borea
Î 2 x protections grids
Î 2 x pedestals
Î 8 x screws
Î 8 x adhesive rubber plots
Î 8 x decoupling spikes
Î 1 x user manual
14

Publicité

Table des Matières
loading

Table des Matières