FeinTech VSP01222 Instructions D'utilisation page 8

VSP01222
HDMI 2.0 ARC / CEC Pass Splitter 2×2
Operating instructions and technical information
Dear customer,
Thank you for purchasing this high quality product. For optimal and safe use, please read this
manual before commissioning. Please keep the manual as a future reference.
Functions:
• HDMI splitter for distribution to 2 HDMI sinks (TV / projector)
• An HDMI output supports ARC (Audio Return Channel). When connected to an ARC/eARC
connection on the TV set, the TV sound can be passed through. For example, to an AV receiv-
er which is connected to the HDMI input of the splitter.
• Switchable HDMI input for a second HDMI source
• Automatic scaler for 4K output on a Full HD display
• EDID management with COPY / MIXED / DEFAULT mode
• Supports Ultra-HD up to 4K 60Hz as well as HDR10, HLG-HDR and Dolby Vision
• Supports all sound formats from input to output. In the return channel (HDMI-ARC), audio
formats up to Dolby Digital Plus (including Dolby Atmos) are supported.
Note:
It is not useful to operate a soundbar here which has only one HDMI connection. One HDMI input
and one HDMI output are required on the soundbar.
If you change the settings on the TV or splitter, note that it may be necessary to restart the con-
nected devices. If you do not obtain the desired output or display, please proceed as follows:
• Switch on the desired EDID mode on the splitter and select the desired HDMI source 1 or 2.
• Disconnect all devices from the power supply for a few seconds, i.e. pull the mains plug.
• Then plug in the power plugs and switch on the devices. In the following order: television,
sound system, HDMI splitter, HDMI source
8