Set The Alarm - Aluratek ADMPF110 Manuel D'instructions

Operations cont.

Set the Alarm

1. Select "Setup" and press "Enter" from the main menu.
2. Use the up or down key to select "Alarm".
3. Use the left or right key to select what you want to change and use the up or down key to change
to the correct value then press "Enter". The 1st number is the hour follow by the minute. The next
item is ring tone selection, Ring1/Ring2. The last item is the alarm status "off", "once", "every".
4. Press "Menu" to return to the main menu.
25