Kichler 35170 Mode D'emploi page 7

ASSEMBLY INSTRUCTIONS
4. Pass the clevis pin through the down rod (B) and
coupling found on the motor assembly (F) then
secure with the hair pin. Tighten set screws found
on the coupling on the motor assembly (F).
5. Carefully lift the fan and seat the downrod (B)/hanger
ball assembly on the hanger bracket (A). Be sure the
groove in the ball is lined up with the tab on the
hanger bracket (A).
4
Hair Pin
Coupling
5
B
7
B
Clevis Pin
A
F