Power; Connect The Speaker To Power; Network Standby; Manually Set The Speaker To Network Standby - Bose HOME SPEAKER 450 Mode D'emploi

Masquer les pouces Voir aussi pour HOME SPEAKER 450:

Table des Matières

Les langues disponibles

1. Connect the power cord into the power port on the bottom of the speaker.

2. Plug the other end of the power cord into an AC (mains) outlet.

The speaker powers on, and the light bar glows solid amber.

The speaker transitions to network standby when audio has stopped and you have

not pressed any buttons or accessed your voice assistant for 20 or more minutes.

To wake the speaker from network standby:

• Tap any button on the speaker.

• Play audio using your mobile device or the Bose Music app.

• Talk to Amazon Alexa or Google Assistant.

NOTE: To access your voice assistant in network standby, make sure the speaker is

set up using the Bose Music app and the microphone is on (see page 33).

Touch and hold the Play/Pause button F until the light bar fades to black.

Dépannage