Safety Notes; Intended Usage - Heitronic 35278 Instructions D'installation Et De Service

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

H. Vollmer GmbH
GB Installation and operating instructions
LED Wall Light
Art. no. 35278
These operating instructions are only intended for the products listed above.
They contain important information about starting-up and operating the light.
Take note of these operating instructions also when transferring the product to a third party.
For this reason it is important to keep these instructions in a safe place for later reference.
1. Introduction
Dear Customer, thank you for choosing to purchase our product.
You have purchased a product from the House of Vollmer, which has been constructed according to today's
state-of-the-art technology.
The light satisfies all the requirements of applicable European and national guidelines.
In order to maintain the condition of the product and ensure safe operation, as the user you must observe
these operating instructions!

2. Safety notes

The warranty does not cover damages caused by failure to comply
with these operating instructions!
We do not assume any liability for any damages caused by incorrect usage!
Usage of the light is strictly prohibited if the light has been damaged.
Do not leave children unattended in the area of the light or other electric devices.
During operation the LEDs are hot. The outer casing of the lights also becomes hot. Do not touch the
light with bare hands while in operation.
Do not bring the light in contact with extreme heat or open flame.
The entire product cannot be modified or rebuilt. The warranty expires if modifications are made to the
light.
The serial plate cannot be removed.

3. Intended usage

The light is designed for indoor/outdoor usage.
This product is only intended for lighting purposes and:
can only be operated with voltage of 230V~50Hz.
can only be connected according to Protection Class I (one).
can only be operated when firmly mounted on a stable, level and tip-proof surface.
can only be operated on normal and/or non-flammable areas.
cannot be exposed to strong mechanical stress or heavy soiling.
Installation instructions article no.: 35278
Page 1 of 3
®
Heitronic
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach Stein
From 30.10.2015

Publicité

Table des Matières
loading

Table des Matières