Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Assembly of Wheels
1.
Insert Axle Bolt (F) into Base Support (I).
2.
Put on #5 Flat Washer. Slide Wheel (G) into Axle Bolt (F)
and add a second #4 Flat Washer.
3.
Use Wrench (H) to tighten the #5 Nut Cup.
4.
Add #4 Flat Washer, second Wheel (G), another #4 Flat Washer, and #5 Nut
Cap to the other side of the Axle Bolt (F), following the directions above.
5.
Use Wrench (H) to tighten the #5 Nut Cap.
(#4)
Flat
Washer
(#5)
Nut
Cap
Assembly of Main Unit
1.
Place Main Unit (A) onto the top of the Storage Compartment (C).
2.
Ensure that the two inserting pins at the bottom of the Main
Unit (A) line up correctly so that Main Unit (A) can be locked
under the beam of the Storage Compartment (C).
(F)
Axle
Bolt
(I)
Base
(G)
Support
Wheel
8
Publicité
Table des Matières
