Sleep Timer; Special Functions - Grundig DTR OB 4000 DAB+ BT Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
TIMER­MODE
Sleep­Timer
The device has a sleep timer which switches off
in radio mode at a preset time. It is possible to
adjust the sleep time between 90 and 10 minutes
in 10 minute increments.
Select­the­switch-off­time­for­the­
sleep­timer
1
Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 akt«.
2
Open the menu with »Sleep«.
– Display: »Set sleep time« and
»Sleep off«, »
SPECIAL­FUNCTIONS
Set­the­display­illumination­–­for­
the­stand-by­mode
You can choose whether the display is always
displayed in the stand-by mode or whether it
disappears after 10 seconds.
1
Open the menu with »Menu«.
2
Select the option »S y stem« with »
Skip­
« and confirm by pressing »Select/i«.
e
3
Select the option »Backli g ht« with »
Tuning/Skip­
« and confirm by pressing
e
»Select/i«.
4
Select the desired option (»10 sec« or »On«)
with »
­ Tuning/Skip­
r
pressing »Select/i«.
5
Press »Menu« to end the setting.
Note:
The display is illuminated after pressing any
7
button.
­--------------------------------------------------------------------------------------------------------------------------
« flash.
­Tuning/
r
« and confirm by
e
3
Set the switch-off time with »
« (in 10 minutes increments) and confirm by
e
pressing »Select/i«.
– Display: »
Notes:
To check the remaining switch-off time press
7
briefly »Sleep«.
You can set the switch-off time also by press-
7
ing »Sleep« (in 10 minutes increments).
Switch­off­the­sleep­timer
1
To switch off the sleep timer earlier, select in
the option »Set sleep time« the option
»Sleep off« by pressing »
« and confirm by pressing »Select/i«
e
– Display: »
­--------------------------------------------------------------------------------------------
Set­the­display­contrast­
This can be optimized by the contrast depending
on the angle of display.
1
Open the menu with »Menu«.
2
Select the option »S y stem« with »
Skip­
« and confirm by pressing »Select/i«.
e
3
Select the option »LCD
­Tuning/Skip­
»
r
»Select/i«.
­
r
4
Select the contrast with »
and confirm by pressing »Select/i«.
5
Press »Menu« to end the setting.
­ Tuning/Skip­
r
«.
­Tuning/Skip­
r
« disappears.
­Tuning/
r
contrast« with
« and confirm by pressing
e
­Tuning/Skip­
r
ENGLISH
«
e
27­
­

Publicité

Table des Matières
loading

Table des Matières