Installation - Blyss EL1716B Mode D'emploi

Installation

IMPORTANT : Please follow the safety advice set out on pages 3 to 5.
- Leave a minimum space around the appliance that is free
from all obstacles : 1 metre to the front of the appliance,
150 mm to each side and 600 mm above the appliance
(shelves, curtains, furniture, etc.).
- Do not lift the appliance by the front.
- The appliance must be fitted to the wall at least 300 mm
from the floor.
a better view of the hearth.
- Secure the appliance to a vertical wall, as indicated below.
x01 Wall support
x01 Wall bracket
x07 (ST4.2x40)
x07 (Ø6x35)
x02 (ST3.5x8)
The screws and wall
plugs supplied are suit-
able for solid walls. For
all other types of wall,
please use
screws and wall plugs.
A distance of 600 mm from the floor is recommended for
FITTING TO THE WALL
1. Remove the front face after turning the
locking hooks.
2. Screw the wall bracket under the fireplace
using 2 screws.
3. Observing the safety distances, mark
out the mounting holes for the wall support,
which must be positioned horizontally using
a spirit level.
For a distance of 600 mm from the floor, the
mounting holes must be 1040 mm from the
floor.
4. Drill the mounting holes, fit the wall plugs
and screw the wall support securely onto the
wall.
5. Hang the fireplace onto the wall support
and check that it is secure.
6. Mark the mounting hole for the fireplace
wall bracket.
7. Unhook the fireplace from its support.
8. Drill the mounting hole and insert the wall
plug.
9. Hook the fireplace onto its support.
10. Screw the fireplace wall bracket onto the
wall. This bracket is a mandatory part of the
safety standards.
11. Mount the front side of the fireplace onto
the slots provided on the sides.
12. Turn the locking hooks, locking the bot-
suitable
tom slots in place.
21