Low Heating; Brightness Control - Blyss EL1716B Mode D'emploi

LOW HEATING

- At default interface, press button
as following:
icon
CELSIUS/FAHRENHEIT SETTING
The default temperature readout is Celsius.
- Long press button
+
- Press button or
to Fahrenheit "F".

BRIGHTNESS CONTROL

- At default interface, press button
displayed "bri" and flashing icon
5 is the highest level as shown following:
≡
twice to display "L" and flashing
- Press  button to set temperature.
+
- Press button
. The default temperature is 10°C (50°F).
. If the set temperature is higher than the room
temperature detected by appliance, the heating
starts. The heating will not start if the set tempera-
ture is lower than the room temperature.
≡
for 3 seconds.
to change the temperature readout from Celsius "C"
-
≡
to select the Brightness Control, it's
- Press  button to start the brightness setting.
+
- Press button
. 5 brightness levels are selectable.
. Default setting is 3.
10
to adjust temperature.
-
or
as following:
-
or to select the brightness level.
Quick start