Switching Between Video Sources - Samsung 8 Serie Mode D'emploi

Switching Between Video
Sources
Press button to switch between devices
SOURCE
connected to the TV.
For example, to switch to a game console connected
to the second HDMI connector, press
From the Source list, select HDMI2. The connector
names may vary depending on the product. Select Tools
button at the upper-right corner of the screen to access
the following functions.
• Anynet+ (HDMI-CEC)
A list appears showing Anynet+ compatible ones of
external devices connected to the TV.
This function is only available Anynet+ (HDMI-
✎
CEC) function set to On.
• Edit Name
You can rename devices connected to the TV to
more easily identify external sources.
With a computer connected to the TV's HDMI (DVI)
port via an HDMI cable, for example, you can change
Edit Name to PC.
With a computer connected to the TV's HDMI (DVI)
port via an HDMI-to-DVI cable, for example, you can
change Edit Name to DVI PC.
With an AV device connected to the TV's HDMI (DVI)
port via an HDMI-to-DVI cable, for example, you can
change Edit Name to DVI Devices.
• Information
View detailed information about the connected
devices.
• Disconnect USB Device
Remove the USB device from the list safely. This
function is only available when the USB device
selected.
Universal remote setup
To add a new external device to control it with the Smart
Touch Control, press the
Universal remote setup on the top right of the screen.
Using the universal remote control, users can control
external devices connected to the TV, such as a settop
box, Blu-ray player, and AV receiver.
[UF8500-XN_ZF]BN68-04803D-02L04.indb 12
SOURCE button.
SOURCE button and select
English - 12
Connecting to a COMMON
INTERFACE slot
(Your TV viewing Card Slot)
Turn the TV off to connect or disconnect a CI card
✎
or CI card adapter.
Attaching the CI Card Adapter
Attach the adapter as shown above.
To install the CI CARD Adapter, please remove the
✎
sticker attached to the TV.
To connect the CI CARD Adapter, follow these steps.
We recommend attaching the adapter before
✎
installing the wall mount, or inserting the "CI or CI+
CARD".
1. Insert the CI CARD Adapter into the two holes on the
product 1.
Please find two holes on the rear of the TV,
✎
beside the
COMMON INTERFACE
2. Connect the CI CARD Adapter into the
INTERFACE port on the product 2.
3. Insert the "CI or CI+ CARD".
We recommend that you insert the CI card before you
mount the TV on a wall. It may be difficult to insert after
mounting. Insert the card after attaching the CI Card
Adapter on TV. It is difficult to attach the module if you
insert the card before attaching.
Using the "CI or CI+ CARD"
• If you don't insert the "CI or CI+ CARD", some
channels will display the message "Scrambled
Signal".
TV Rear
port.
COMMON
2013-11-01 10:27:07