DynaTrap DT1260-TUNCA Guide De L'utilisateur

MODEL: DT1260-TUNCA
OWNER'S MANUAL
Thank you for purchasing this
DYNATRAP Mosquito Trap!
®
This product may be covered by one or more U.S. patents
or pending patent applications. See www.dynatrap.com/patents
IMPORTANT SAFETY
INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
WARNING, When using electric appliances, basic precautions should always be followed, including the following:
– To disconnect, turn all controls to the off ("O") position, then remove plug from outlet.
– Unplug from outlet when not in use and before servicing or cleaning.
– To reduce the risk of electrical shock, do not put appliance in water or other liquid.
– This appliance is provided with double insulation. Use only identical replacement parts.
CAUTION: To reduce the risk of injury from moving parts, unplug before servicing.
WARNING: Risk of Electric Shock.
See instructions for Servicing of Double-Insulated Appliances.
IMPORTANT SAFETY INSTRUCTIONS
Please read these instructions before using the DynaTrap ® Mosquito Trap and keep for future reference.
1. Always turn unit off and disconnect plug before servicing, cleaning, or changing bulb.
2. Do not position the unit near heat, gas, oil or other flammable materials.
3. Mount product out of reach from children.
4. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged, or if it has been dropped into water.
5. Do not insert fingers or any foreign objects into the unit while it is connected to an electrical outlet.
6. Collected mosquitoes within the unit may contribute to fire, so clean insects from the unit frequently.
7. Do not clean this product with water spray. Do not place where it can fall into water, or near flammable materials.
8. Do not touch fan while in motion.
9. Do not abuse cord—never carry or hang unit by cord or yank it to disconnect from receptacle. Keep cord away from heat,
oil, or sharp edges.
10. Use only extension cords that are clearly marked "Suitable for Use with Outdoor Appliances" and that have plug and
receptacles that match the product plug. Replace all damaged cords.
11. Only use attachments recommended or sold by the manufacturer.
12. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
13 Do not use the machine on desk or in hand.
14. SERVICING OF DOUBLE-INSULATED APPLIANCES - In a double-insulated appliance, two systems of insulation are provided
instead of grounding. No grounding means is provided on a doubleinsulated appliance, nor should a means for grounding
be added to the appliance. Servicing of a double-insulated appliance requires extreme care and knowledge of the system,
and should be done only by qualified service personnel. Replacement parts for a double-insulated appliance must be
identical to those parts in the appliance.
A double-insulated appliance is marked with the words "DOUBLE INSULATION" or "DOUBLE INSULATED." The symbol
INSTALLATION & OPERATING INSTRUCTIONS
1. Unpack unit. Save carton for off-season storage (if needed).
2. Assemble Stand: Pull the cord tight through the pole stand. Turn base on its side and insert bottom threaded plastic piece
into base, connecting to the threaded plastic cap. Twist threaded plastic cap clockwise to tighten. Complete installation by
INSTALLATION & OPERATING INSTRUCTIONS
aligning upper and lower support tube and inserting the bar sections.
(For more detailed instructions, please refer to assembly guide)
3. Plug cord into an outlet or UL listed extension cord as described in
"IMPORTANT SAFETY INSTRUCTIONS".
4. Hold the Power switch on the side of the revolving rotation door. Twist the unit to the
"Power ON" position. When you hear a "click", the machine is turned on.
5. For best catch results leave unit on at all times, except when cleaning or servicing.
6. Catch rate activity will be higher at night. For best catch results it is recommended to keep
the unit away from competing light sources. Intended for household use only.
7. It is recommended to place the unit at least 20 to 40 feet away from where people will be sitting.
8. This unit is all-weather resistant - designed for outdoor use including rainy conditions.
ALL-WEATHER
9. To Reduce the Risk of Electric Shock, this appliance has a polarized plug (one blade is wider than the other). This plug will
CONSTRUCTION
fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
INDOOR/OUTDOOR
contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
RAIN OR SHINE
USER-MAINTENANCE INSTRUCTIONS - CLEANING
Frequent cleaning will prolong the life of the unit, ensure fire prevention and
provide for more efficient operation.
1. Be sure to clean the unit once per week
2. To clean, hold the switch on the revolving rotation door and turn it to the "POWER OFF"
position. After hearing the "click", the machine is turned off. Unplug the unit.
3. For weekly cleaning, twist the cage
clockwise. Remove any buildup from the inside of the retaining cage and fan with a brush
(included).
4 For major cleaning, remove the four screws securing the fan housing to the light housing.
After removing the screws, gently pull the fan housing away from the light housing. Using
a soft brush, remove dirt and debris from the light housing. Once the cleaning process has been completed, align the screw
holes in the fan housing with the screw holes in the lighting unit and tighten the screws to the base of the lighting unit.
5. When replacing the retaining cage – DO NOT press/push against the screen windows.
REPLACING BULB
The light bulb life expectancy is approximately 3,000 hours (or about 4 months), and should be replaced regularly to ensure
optimal UV effectiveness. Even though the bulb's light may be visible to you, its ability to attract mosquitoes diminishes over time.
1. Turn power switch to "off" position. UNPLUG UNIT, and allow bulb to cool before replacing.
2. Twist the cage clockwise. Turn the unit upside down.
3. Remove the four screws securing the fan housing to the light housing. After removing the screws, gently pull the fan housing
away from the light housing. Using a soft brush, remove dirt and debris from the light housing. Once the cleaning process
has been completed, untighten the screw securing the base of the light bulb to the light housing. Slide the metal bracket to
the side. Cover the bulb with a cloth to protect your finger and hand. Grasp the bulb (with your hand and fingers protected
by the cloth) and gently pull the bulb from the socket.
4. Remove any debris from the lamp socket with a brush before inserting the new bulb. Replace the metal plate over the base
of the bulb and tighten the retaining screw.
5. Align the screw holes in the fan housing with the screw holes in the lighting unit and tighten the screws to the base of the
lighting unit.
6. Replace the retaining cage at the bottom of the unit.
Replacement fluorescent bulbs can be found at your local retailer or can be ordered directly
from DynaTrap by calling 1-877-403-TRAP (8727) or visiting www.dynatrap.com
HOW THE DYNATRAP
Flying mosquitoes are attracted to the unit by the UV light. The fan then
pulls the mosquitoes into the screened base, trapping them until they
dehydrate and die. The base can be removed, allowing the contents to be
periodically emptied into the trash. The see-through screen shows the
mosquitoes trapped in the compartment, alerting you when the cage needs
to be emptied.
- Replace With DynaTrap Bulb #41050 (or equivalent G24 Type - 56V/7W Bulb)
® MOSQUITO TRAP WORKS
UV BULB
FAN
RETAINING
CAGE
TROUBLESHOOTING
Problem: Possible cause:
Bulbs do not illuminate 1. No electrical power
and fan does not spin
Bulb illuminates, but fan 1. Shorted fan
does not spin
Fan spins, but bulb does 1. Bulb not seated
not illuminate properly
2. Burnt out bulb
LIMITED WARRANTY
DYNAMIC warranties to the original purchaser that this product is free from defective materials and
workmanship. This warranty is limited to remedy any defective part for a period of one year from date of
original date of purchase. Retain your original receipt as proof of purchase. This warranty does not apply
to the light bulb, nor to, in our judgment, misuse or abuse. If this unit has been altered, no warranty is in
force. This warranty does not apply if this unit is purchased outside the United States, Canada and Mexico.
In no case shall DYNAMIC be liable for any accidental, punitive, consequential, or any other damages of
any kind for breach of this or any other warranty, expressed or implied, whatsoever. Some states do
not allow limitation on how long an implied warranty lasts, so the above limitation or exclusion may not
apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary
from state to state.
PARTS & ACCESSORIES AVAILABLE
PART DESCRIPTION
41050
7-Watt Replacement Fluorescent Bulb (1 piece)
To see all replacement and accessory parts available for your DynaTrap,
including UV-bulbs, fans, retaining cages, and more, visit www.dynatrap.com.
HANGER
Dynamic Solutions Worldwide, LLC
12247 W. Fairview Ave. Milwaukee, WI 53226
Phone: 414-431-2819
Toll free: 1-877-403-TRAP (8727)
ON/OFF
SWITCH
Email: dynatrapinfo@dsw-llc.com
Visit us online at www.dynatrap.com
© Dynamic Solutions Worldwide, LLC
SAVE THESE INSTRUCTIONS
Correction:
1. Check plug and receptacle and fuse or circuit breaker.
2. Check to make sure power is switched to the "ON"
position.
1. UNPLUG UNIT: Examine fan to see that it is free from
foreign material, dirt or build-up of dead insects. Clean unit as
in "CLEANING" section.
1. Check all sockets for proper bulb seating and alignment.
2. Replace bulb if needed following instructions under
"Replacing Bulbs".
For Household
Use Only
This device complies with
Performance Standards for
Light-Emitting Products, 21 DFR,
Part 1040, Chapter 1,
Subchapter J, Radiological Health.
A000-448.3