Alarms; How To Order Spare Parts; How To Dispose Of The Packing; How To Dispose Of The Unit - Zanotti ZM Série Notice De Mode D'emploi Et D'entretien

12.4 Alarms

Probe alarms "P1" and "P2" start some seconds after the fault in the related probe; they automatically stop some
seconds after the probe restarts normal operation. Check connections before replacing the probe.
Temperature alarms "HA" and "LA" automatically stop as soon as the thermostat temperature returns to normal
values and when defrost starts.

13 How to order spare parts

When ordering spare parts make reference to the number written on the unit plate.
WARNING
Worn parts should be replaced only by qualified personnel or by the manufacturer.

14 How to dispose of the packing

Wooden, plastic, polystyrene packing shall be disposed of according to the regulations in force in the country

15 How to dispose of the unit

Do not discharge scrapped components in the environment. They should be disposed of by companies
WARNING
Do not discharge the refrigerant in the atmosphere. It should be disposed of by
companies dealing with special waste collection and recovery.
Message
"P1"
"P2"
"HA"
"LA"
"dA"
where the unit is used.
dealing with special waste collection and recovery, according to the regulations in force in
the country where the unit is used.
Cause
Room probe failure
Evaporator probe failure
Maximum temperature alarm
Minimum temperature alarm
Door open
29