Setting Up Windows Xp Tcp/Ip Printing - Atlantis Land A02-PSU Guide De Démarrage Rapide

1.6.4 Setting Up Windows XP TCP/IP Printing

Following is the correct procedure for setting up TCP/IP LPR
printing under Windows XP.
Click Start > Printer and Faxes. Double Click "Add a
Printer" then click "Next". In the next windows select "Local
Printer". Create a new "Standard TCP/IP Port" then click
"Next". Input the IP Address of the Print Server, and the Port
name of the Port that will be printed to, then click "Next".
In the next page Select "Custom", and click "Settings".
Select "LPR", and put the Port name in the field labeled
"Queue Name". Then Click "OK". Click "Next". Click
"Finish"
The Printer Install Wizard will now prompt for drivers. Select
the correct Make and Model, or click "Have Disk", to provide
the Manufacturer's Driver Disk.
If you use Windows 98, the system will
restart after configuration.
ENGLISH
24