LevelOne GEMINI FCS-5092 Guide D'installation Rapide page 4

4 Network Camera Quick Installation Guide
For your privacy and to better protect your system against security risks, we strongly

recommend the use of strong passwords for all functions and network devices. The
password should be something of your own choosing (using a minimum of 8
characters, including at least three of the following categories: upper case letters,
lower case letters, numbers and special characters) in order to increase the security
of your product.
Proper configuration of all passwords and other security settings is the

responsibility of the installer and/or end-user.
 Modify network parameters
Steps:
1. Select the device to be modified in the device list and the network parameters of the
device will be displayed in the Modify Network Parameters panel on the right side.
2. Edit the modifiable network parameters, e.g. IP address and port number.
3. Enter the password of the admin account of the device in the Password field and
click to save the changes.
Notes:
The default IP address of the camera is 192.168.1.64.

And you need to activate the camera via SADP software. For the
