Samsung NX58 565 Serie Manuel D'installation page 27

Installation instructions
To start the bake burners:
Install_NX58H56_DG68-00524A-13_EN+MES+CFR.indb 27 Install_NX58H56_DG68-00524A-13_EN+MES+CFR.indb 27
All manuals and user guides at all-guides.com
1. Press the Bake pad. The oven will beep
every time a pad is pressed.
The default temperature 350 ° and the
Start indicator will blink on the display.
If the default temperature is the desired
cooking temperature, skip to step 2.
2. Press the number pads to change the
temperature setting to the desired
temperature setting. The selected
cooking temperature and the Start
indicator will blink on the display.
3. Press the START/SET pad.
The display will show a blinking •,
along with 150 °, Bake, and the bake
element icon, until the oven reaches that
temperature; then the display will just
show the actual oven temperature.
The oven will automatically light after
30 ~ 90 seconds and start preheating.
When the oven reaches the desired
baking temperature, it will beep 6 times.
4. Press the OFF/CLEAR pad to shut off the
The oven burners require electrical power
to operate. They cannot be lit manually with
a match, so the oven cannot be used during
power outages.
To start the broil burners:
To check ignition of the broil burner, touch
the Broil Hi/Lo Pad and then the start pad.
After 30 ~ 90 seconds, the broil burner will
ignite.
oven.
The display will show the time of day.
NOTE
English 27
2020-10-13 2020-10-13 11:50:34 11:50:34