Philips Sonicare 3000 Serie Mode D'emploi page 12

12
English
Filling the Reservoir
Inserting and removing nozzles
Fill the reservoir with lukewarm water. There are two
easy ways to fill the reservoir.
Note: When filling reservoir, do not exceed the max fill
line.
Note: Remove the charger from the Cordless Power
Flosser prior to filling the reservoir and using the
device.
Option 1:
Lift the flip top to the side of the reservoir and fill the
reservoir through the quick side fill port.
Option 2:
Twist to detach the reservoir and fill the reservoir
1
through the wide mouth opening.
2 Fill the reservoir.
3 Twist the reservoir to reattach.
Insert your preferred nozzle into the handle. Press the
nozzle down until you hear a "click".
Note: Ensure the nozzle is fully inserted and flush with
the top of the device.