Kimex 161-4300 Manuel D'utilisation page 26

1
1. RJ45 connector.
2. Switch button: Press ''I'' to turn on, and ''O'' to turn off.
3. Power supply 100-240V (50/60Hz), check the power according to the model: power cable with European "F"
type plug, length 1.5 m, 10 A, 1000 W.
Caution :
Only connect the totem to the power supply if it is placed on a stable and dry floor, in an environment as indicated
in the technical description and there is no run-off either above the totem, on the floor, along the power cable
passage or above the power supply wall socket.
Do not move an appliance connected to the power supply.
The totem pole is a class A device, which means that it can cause radio interference effects in its environment like
any other device with a large LCD panel and a Wi-Fi transmission system. It is potentially sensitive to interference
from surrounding devices. In this case, please check other equipment installed nearby.
Do not place the Totem in direct sunlight or near a heat source, as this may damage it.
2
Page 26 de 28
3