Kimex 161-4300 Manuel D'utilisation page 22

OPENING THE BOX AND ASSEMBLING
List of box contents :
• A vertical digital signage totem pole.
• A floor stand to be assembled to the body with the screws provided.
• A power supply cord, standard European "F" type plug.
• A safety key to open the rear hatch of the totem.
• A remote control.
•
A set of screws and washers with an allen key to assemble the stand to the body of the totem.
Opening the box and assembling the Totem (2 people) :
1. Place the box on its edge on a flat surface with the carrying handles facing up (Fig. 1).
2. Open the top cover (Fig. 2).
3. Remove the cushioning blocks from both sides of the box (Fig. 3).
4. Remove the base (Fig. 4).
5. Remove the unit from the carton (Fig. 5) and place it on a flat table previously covered with a soft cloth or
bubble wrap to prevent scratching. Check that there is no dust or foreign matter on the table before laying the
totem flat (Fig. 6).
6. Carry out a visual inspection of all components.
7. Finally, attach the base to the body with the screws and washers provided and place it on the floor. (fig. 6-7).
(Fig. 1) (Fig. 2)
(Fig. 4)
(Fig. 6)
Page 22 de 28
(Fig. 3)
(Fig. 5)
(Fig. 7)