Orbegozo BV 12000 Manuel D'instructions page 9

BV 12000
DESCRIPTION
1. Measuring cup.
2. Jug cover.
3. Glass jug.
4. Blades.
5. Seal for glass jug.
6. Inside hardware ring.
7. Jug holder.
8. Jug support on motor body.
9. Main body decoration.
10. Main body.
11. Speed selector knob.
12. Non-slip feet.
Your blender has been designed for the following applications: chopping
and mashing fruits and vegetables; preparing smoothies, shakes and
juices; preparing cold soups; preparing dressings, dips and sauces. The
maximum capacity of the appliance is 1500 ml.
The appliance is suitable for indoor use only.
The appliance is suitable for domestic use only.
Before you proceed, we need you to pay attention to the following
notes:
- The appliance has been designed for mixing cold and lukewarm
ingredients (max. 55 °C).
It is recommended not to use the appliance for mixing hot liquids and
solids. Hot liquids and solids can easily cause the jar to break and the jar
lid to abruptly come off the appliance due to steam pressure. Keep the
jar lid pressed with your hand when mixing lukewarm liquids to prevent
leakage.
OPERATION
1． Connect the power.
2． This unit have safety design, it do not work if the jar is not install on main body properly.
3． Fill in the blender's jar with desired food.
4． Put the cover on top of the jar and fix it. Place the measuring cup on the center of cover,
anticlockwise rock the measuring cup slightly.
5． Put the blender glass jar onto the main body, and turn it slightly in a clockwise so it locks with the
motor base. And the machine was fully assembled.
6． Turning the knob to required speed (P—pulse, grade 1 to 5 means speed of blades from low to high).
Ensure to place the knob in 0 position when you stop using the blender.
7． During working mode, the blue light around the knob is on.
SWITCHING ON AND OFF
Before you proceed, we need you to pay attention to the following notes:
- Do not switch on the appliance when the jar is empty.
- Do not leave the appliance switched on continuously for more than two minutes.
• To switch on the appliance with continuous speed, set the power knob to the 1, 2, 3, 4 or 5 positions.
• To switch on the appliance in pulse mode, set the on/off switch to the 'P' position. Blender will work in this
mode while you keep the knob in this position, if you release the knob, it will return to position 0.
• To switch off the appliance, set the on/off switch to the '0' position.
HINTS FOR USE
- Do not overload the appliance. Do not put too many ingredients into the jar at one time.
• Cut the fruit and/or vegetables into pieces.
9